Ingenuity Keep Cozy 3-in-1: Bouncer to Rocker to Toddler Seat

Start with the right mode for your baby's stage

The Ingenuity Keep Cozy 3-in-1 grows with your child from 0 to 30 months and up to 40 pounds, giving you three ways to use it: bouncing, rocking, or a stationary toddler seat. Before you assemble or convert, decide which mode suits your baby right now. Newborns need the added support of the infant bolster, while older babies may prefer the gentle motion of bouncing or rocking. Toddlers who can sit independently can use the seat with the kickstand deployed.

This guide walks you through the setup and conversion steps using the supplied product instructions, so you can switch modes safely as your child grows.

Assemble the Keep Cozy Weaver frame

Assembly is required. Follow these steps to put the frame together correctly:

1. Unpack and identify parts: Lay out the frame pieces, seat pad, bolster, and toy bar. The seat pad and bolster are machine washable, so you may want to wash them before first use.
2. Fasten the seat pad to the frame: Attach the seat pad by fastening the buckles on the seat restraint and seat pad. Make sure all hook-and-loop patches are pressed firmly onto their corresponding patches.
3. Attach the toy bar: The toy bar holds the detachable plush elephant toy. Wipe the toy bar and toy with a damp cloth and mild soap before attaching. Do not immerse them in water.
4. Insert battery for vibrations (optional): The soothing vibration feature requires 1 C alkaline battery (not included). Open the battery compartment, insert the battery, and close securely.
5. Check stability: Place the assembled seat on a flat, stable surface. Ensure all buckles and patches are secure before placing your baby in the seat.

Use the infant bolster for newborns

The removable infant bolster helps newborns sit more securely and comfortably. Position the bolster around your baby's sides and between the legs as shown in the product instructions. Always use the 5-point harness to keep your baby secure, even with the bolster in place. When your baby outgrows the bolster, simply remove it to give them more room.

Switch between bouncer, rocker, and toddler seat

The Keep Cozy converts easily between modes. Here's how each mode works:

• Bouncing mode: With the kickstand retracted (folded up), the seat bounces gently in response to your baby's movements. Use bouncing mode for playtime or when your baby needs soothing motion.
• Rocking mode: The seat also rocks when the kickstand is retracted. The bouncing and rocking motions are inherent to the frame design; no additional adjustment is needed to switch between them.
• Stationary toddler seat: For a stationary seat, deploy the kickstand at the rear of the chair. This locks the seat in place, making it suitable for a toddler who is sitting independently. Always use the 5-point harness.

When to switch modes as your baby grows

There is no strict age for moving from bouncing to rocking or to the stationary seat; watch your baby's development instead. Keep using the bouncing or rocking mode as long as your baby seems comfortable and secure. When your baby starts trying to sit up or prefers a more upright position, you can switch to the stationary toddler seat by deploying the kickstand. Always ensure the harness is properly fastened and the seat is on a stable surface.

The Keep Cozy is designed for children up to 40 pounds and 30 months. If your child exceeds either limit, discontinue use.

Cleaning and care for long-term use

Keeping the Keep Cozy clean is simple. The seat pad, bolster, and headrest are removable and machine washable. Wash them in cold water on a gentle cycle, then tumble dry on low heat or air dry. Do not use bleach. For the frame, wipe with a soft, clean cloth and mild soap. The toy bar and plush elephant toy should be wiped clean with a damp cloth and mild soap; do not immerse them in water. Regular cleaning helps maintain a hygienic seat for your growing child.

Key specifications for the Keep Cozy 3-in-1

• Ingenuity Keep Cozy 3-in-1 Grow with Me Baby Bouncer, Rocker & Toddler Seat, Weaver: Assembled dimensions are 24.41" (H) x 19.49" (W) x 26.38" (D). Check that the seat fits your space and leaves room for safe use.

  

• Ingenuity Keep Cozy 3-in-1 Grow with Me Baby Bouncer, Rocker & Toddler Seat, Weaver: User age range: 0–30 months; accommodates children up to 40 pounds. This defines how long you can use the seat and when to transition to other gear.
• Ingenuity Keep Cozy 3-in-1 Grow with Me Baby Bouncer, Rocker & Toddler Seat, Weaver: Materials: 45% plastic, 30% metal, 25% fabric. Knowing the materials helps you assess durability and cleaning needs.
• Ingenuity Keep Cozy 3-in-1 Grow with Me Baby Bouncer, Rocker & Toddler Seat, Weaver: Includes 5-point harness and removable infant bolster. These safety features are essential for securing your baby in every mode.
• Ingenuity Keep Cozy 3-in-1 Grow with Me Baby Bouncer, Rocker & Toddler Seat, Weaver: Vibrations powered by 1 C alkaline battery (not included). Plan to have the correct battery on hand if you want to use the soothing vibration feature.